AQUALINE PLUMBING, ELECTRICAL & Heating LLC

aqualine plumbers electricians heating Seattle WA

CALL US TODAY ON:

(206) 960-4127

Location:

Seattle, WA

Signs It Is Time For Replacing A Furnace

9/25/2018

A healthy house needs a furnace in great operating condition. Do you’ve a furnace which is causing issues? Is your house heating system over 20 years older and have you really spent money on the furnace repairs in past 2 years? If you’ve answered yes, it might be time to quickly replace your house’s furnace. For many more methods to know if the heating unit is on fritz, check this list of Signs That it is Time for Replacing Your House’s Furnace.

Strange Noises Coming From Your House Furnace

Is the furnace making odd noises like squealing, banging and popping? Old furnaces give out such sounds whenever they are towards end of their lifespan. So, if you ever find any such noise coming from the furnace, it’s time to probably get a new one right away.

Uneven Temperature In Your House

Do a few rooms are colder than other rooms? Are you changing your thermostat constantly so that you feel much more comfortable? These indications may mean that your current heating unit is not capable to distribute the heat evenly all through the home, and that’s why you’re experiencing these issue. If you see any of these indications, it means that you might have a faulty or old system which needs replacing.

Health problems

Is anybody in your family complains of frequent headache; burning sensation in nose or eyes; or disorientation and nausea? If yes, it might be time to quickly replace your house furnace. Old furnaces can develop holes or cracks in heat exchanger, which can emit the carbon monoxide gas in the house. In fact, it’s a dangerous situation which you should address right away!

Heating Seattle

Dusty or dry home

If your heating unit does not offer sufficient moisture or cleaner air in your home, it might be an indication to replace your house heating unit. Excessive dryness affects walls, furniture and plants in your home. Also, this kin d of extreme dryness can lead to issues for you as well as your family, particularly if anybody is allergic to pollen or dust. Therefore, when you see walls peeling or plants drooping, it is time to probably get a brand new furnace.

Higher heating bill

Is the heating bill higher than in past years? The rising costs of electricity or gas isn’t the only cause for higher heating bill. When your house’s heating unit becomes less effective, it will need to work harder so as to offer adequate level of heating. When it happens, your bill will surely go up. That is why it makes a lot of sense to spend money to replace the furnace, since over life of new furnace you will enjoy the advantages of reduced bill.

Short-Cycling

This is what it is called when the furnace keeps turning off and on rapidly all through the day. It’s caused by something that is causing your heating unit to overheat. When the furnace turns on, rapid increase in the heat levels causes furnace control systems to think that its overheating. Furnace shuts down like a safety measure. Once it is cooled off, it gain starts up and the entire cycle repeats. It can be a great wastage of energy, and it shortens the lifespan of your furnace more. If you face this symptom, turn the furnace off and contact Seattle Heating.

Do you experience any of the above mentioned signs? If yes, talk to heating contractor who can recommend whether you should replace your house’s furnace or not. A replacement will assist you save your money and enjoy healthier life! ​

What You Should Know Before Replacing A Furnace?

9/22/2018

Is it now time for getting a new furnace installed? Probably so, if old one is requiring costly repairs or undergoing frequent breakdowns. The good news however is that a new furnace will really be far more effective, decreasing your heating bills whereas keeping you much more comfortable on coldest winter night. Here is what you should know about replacing the furnace.

Know Whether You Should Replace Or Fix

A good thumb rule is that it is time to now replace your furnace in case it is beyond three-quarter of its own life expectancy and repairs would cost much more than 1/3rd of replacement costs. How will you know whether it’s beyond 3-quarters of its own life expectancy? Check label (or ask the contractor) for its specific manufacturer date; the furnaces last for an average of about 15 - 20 years —perhaps another 5-6 years if it is a higher-quality brand and is maintained regularly.

Understand The Efficiency Mathematics

Today’s standard furnaces are about 80 percent efficient (means20 percent of fuel energy simply goes up in the chimney). However, you can get the furnaces all up to about 98.5 percent efficient, which is actually listed on the products information as AFUE rating. That type of super efficiency may tag on nearly $1,000 - $2,000 to the cost, so get a rate quote and do all the maths: For instance, if you are paying $2,000 as annual heating cost, a 15 percent bump in AFUE would save you around $300 every year. If the additional cost is about $1,500, which is a five-years payback, well worth your upfront cost provided that you’re remaining put for next, say, 8-10 years to net the profit on expenses.

Heating Seattle

Check Your Ducts

There is more to heating systems than the furnaces, certainly, and your home’s ducts—tubes that deliver heated air from one room to another—can be a great source of inefficiency. One third of the heated air can be escaping in the unheated attics, basement, or crawlspace. A duct specialist or the heating contractor such as Heating Seattle can enhance the older ducts by removing insulation, re-insulating, and taping up gaps. Or you can employ a contractor to seal the ducts by spraying higher-tech substances inside the ducts which congeals around openings in order to make a rubbery seal on every single crack and gap. This method can also seal small openings which are inaccessible to any repair technicians. The process costs abound $500 - $1,500 and can slash your heating bills by 20 percent—possibly a much better return on your investment than the higher-efficiency furnaces.

Lower Your Heating Requirements

Another probably better move than the super-efficient furnaces is adding insulation into your house. Begin by getting an energy audit performed (many states have list of authorized companies which do this work, at times for a subsidized price or for free). The investigator may suggest a few simple steps—such as adding attics-floor insulation or just spraying foam along top of your foundation walls (possibly $500 for each), or might suggest blowing insulation in the wall ($2,000 - $5,000 ). The crew will remove a siding row for every story of your home, drill holes in sheathing each 16 inch gap or so, and even blow cellulose fibers (ground-up newspaper) in it. Then they glue drilled-out plug back in place as well as reinstall the siding. (Then you will need a little touch-up painting too.) You could slash the heating needs 5 percent (if adding to current insulation) to up to 25% (in case there’s no or little current insulation) of heating bills, meaning lesser monthly bills—and probably a small new furnace.

Why Should You Avoid Do-It-Yourself Furnace Repairs?

9/18/2018

There are many reasons to perform DIY repairs in your house to save your money, but furnaces tends to be a case where dangers outweigh the advantages. But, with the correct experts like Heating Seattle on your end, you won’t just have to worry on expensive DIY furnace technicians visits as you’ll be able to avoid them before they turn into expensive emergency repairs. Let’s have a look at the main reasons to avoid any DIY furnace repairs and what can you do instead.

Fires aren’t the only reason why DIY furnace repairs don’t work out

One among the clear reasons that homeowners must avoid DIY furnace repairs relates to the carbon monoxide poisoning as well as inhaling toxic gases. Other problem caused by DIY repair is doing the things in wrong way, and making the home fill up with some flammable gas. Some other reasons to prevent DIY furnace repairs relates to not knowing the electrical parts of furnace or reasons it may need plumbing.

Homeowner’s insurance policy need inspections

When you’re applying for new homeowner insurance or having present one updated, you’ll have to show them that you’re taking complete care of your house. One among the keys is having regular maintenance and inspections of all your house’s equipment. Unluckily, if you don’t have regular proofs that you’ve had the house safeguarded against all major claims related with fires, you might find that they drop you right away from your coverage. As furnaces could cause fire and result in other major damages in the house, insurance companies won’t favour a homeowner who doesn’t keep the paperwork updated.

DIY repairs can make selling your house difficult

When any homeowner puts their home on the market, next buyer might not be very impressed by lack of paperwork revealing that real estate tends to be a great investment. One among the ways that the homeowners can prove that they’ve been taking complete care of property they are now selling is by offering documentation that the house has been serviced by contractors regularly. For example, having a regular inspection and maintenance of furnace will be vital to showing the potential homeowner that the real estate won’t just need any major appliance replacements or repairs in the upcoming near years.


Heating Seattle

If there’s fire, your furnace can be considered distrustful

When your house experiences a fire, then one among the first steps tends to be to have fire department inspector to come and see if there is any clue about what lead to the fire. Sadly, a few homeowners find that they just lost their property because of simple mistakes which might have been avoided easily. For instance, they might have been burning some candles next to open window that were surrounded by curtains which caught fire when wind picked up. Eventually, a few homeowners find the difficult way that scheduled inspection and maintenance regularly of their furnace was a better idea instead of DIY repair for the furnace that they found on the web.

DIY furnace repair jobs that are secure for homeowners

Though most of the furnace repairs should be left to the professionals, there are some routine jobs which can help decrease utility bills and can be done by homeowners. One among the most popular furnace tasks is t change the filters on a regular basis. A second task which homeowners can remain on the top of is simply checking the thermostat in order to see if that can be lowered. Ultimately, homeowners can improve the longevity greatly of their furnace just by installing smarthome thermostat which is monitored regularly using an app. Overtime, the homeowners will utilize the smarthome app so as to adjust the quantity of energy that their furnace is utilizing all through the day, and it means your machine isn’t working as hard.

Sparking Outlets: Should You Be Worried?

8/24/2018

Electricity has made our lives very easy and convenient. Our lives will stop completely in the absence of electricity. But every good thing is not without its associated dangers. If not given timely attention to faulty circuits, short circuits or overloaded circuits, it can pose danger to our safety.

You probably have seen the little spark when you plug in any appliance and must have ignored it. You should know that sometimes that harmless spark can lead to big mishaps. Outlet sparking is not something that should be ignored because they can be an early sign of some grave danger.

What causes outlets to spark?

  • Normal sparks- Electricity in your home run in the circuits to the main grid without any disruption. When you plug something in the outlet, the fast and hot electricity jumps from the outlet to the appliance causing it to spark. This is very normal and should not be a cause for concern.
  • Short circuits- Sometimes when the heat buildup is high, the insulation around the wire melts down. The exposed wires are prone to catch fire when an appliance is connected to the circuit. Such sparks should not be overlooked. A professional Electrician Seattle should be called to fix the issue.
  • Bad repairs- When you hire an inexperienced electrician to do the electrical repair work in your home, the poor repairs done by him can lead to bigger problems in the future and the consequences can be as bad as a house fire.
  • Water- When an outlet is exposed to moisture or water, it can trigger a spark. A GFCI outlet is the most suitable for the places near water like near swimming pool and bathroom. Ground fault interrupter outlet shut down the circuit when it detects the moisture.
  • Age- With the passing time, outlets can get old and can wear out making them to spark. Old and frayed outlets should be replaced immediately.
  • Overloaded outlets- Sometimes when the number of outlets falls short of our need, we use an extension cord. Connecting too many appliances in one outlet can overload it causing it to spark.
  • Electrician Seattle

    Which sparks are bad?

    • Sparks which lingers for a long duration- Normally spark should come and go for a fraction of seconds but if the sparks linger for long then it's a sure sign that you should call your electrician.
    • White sparks- It’s important that you pay attention to the color of the sparks. Normal sparks are blue in color but if you see the white or yellow spark that means you need an electrician.
    • Big sparks- If the spark that you see is not a small one, but is jumping out from the outlet, that means they can be dangerous.
    • Burning smell- If along with spark you also notice the burning smell that means something is burning and melting. It needs an immediate attention. You should immediately shut down the outlet from the circuit panel.

    If you are noticing a spark every time you plug in an appliance you should take some smart steps in order to keep you and your family safe. When you see any unusual sparking from an outlet, you should shut down the breaker for that outlet and plug out the appliance. After ensuring the safety, call an electrician to fix the issue. If you don’t have GFCI outlets in your home, consider getting them installed near the area around water or moisture. Be safe and work smartly to prevent the dangers of house fires. Simple steps and timely attention can keep you and your family safe. ​

    Working Of Camera Video Inspection For Commercial Property’s Sewers

    8/16/2018

    Being business owners, you work is to ensure that you are doing the best possible job and providing quality products or services to your clients. However, if your business’s plumbing system isn’t working appropriately, it can stop your business.

    Knowing the conditions of your pipes by regular maintenance and inspection can prevent an issue before it starts. But, if you are having sewer line problems, technicians using video cameras can easily peer into the pipes with the assistance of CCTVs and inspect them quickly for leaks, obstructions, blockage, roots growth or other problems that might be causing sewage backups or flooding at your business place.

    Video Inspection of Sewer Pipes

    To evaluate your commercial place’s sewer lines, a skilled technician will insert professional video cameras into your pipes and will assess the line through following steps:

    Entry: Maximum businesses have cleanout port access present for their sewer lines and a technician can use this entry point to access your pipes. For properties which don’t have in-built insertion points, it’ll have to be made in order that sewer camera could be inserted in the pipe. It’ll require the Plumber Seattle to dig small hole to reach to pipe, and make small hole in pipe through which they need to insert their camera.

    Insertion:Next is insertion of sewer camera in the pipe. The inspection camera is quite small and sends live feed to monitor/CCTV through fiber optic cable and that allows the plumber to view the inner of the pipes.

    Examination: Since CCTV operator is completely watching it in real time, they are able to use camera to see everything when it makes its own way down the pipes from time it’s inserted. During the whole process, the plumbing specialists will be capable to find whether the pipes have slipped, are broken, or if they’re obstructed by the grease, globs of hair, or organic growth such as tree roots. The entire video is recorded in order that it could be reviewed for better determination of the sewer pipe problems.


    Plumber Seattle

    Evaluation: Once a camera has run length of the pipes, then the video is reviewed fully and an recommendation will be made on how can you proceed. The sewer camera can spot a number of problems with your pipes, like:

    • Blockages and obstructions
    • Infiltration and collapsed sewer lines
    • Commercial cleanouts
    • Cracked/broken pipe
    • Corrosion
    • Offset joints
    • Drain lines
    • Pipe slippages
    • Root infiltration
    • Recessed taps
    • Service and commercial lateral

    Commercial buildings which involve preparation or handling food have exclusive sewer problems. The sewer pipes could become clogged because of a sludge or grease buildup on the interior of pipes. While blockages may be caused by lack of proper maintenance and not a breakage necessarily in property, it happens more often in the food service facilities since use of vegetable matter, grease, and other foodstuffs going down the drains could cause clogs.

    If the sewer pipes are blocked because of these types of problems, pressure washing your sewer lines can eradicate the issue by removing clogs caused by cooking waste, grease, hair, food oil, fibrous tree roots and food materials. When the service is done on a yearly basis, you must be able to run your business free from the threats of plumbing backing up as well as risking problems with health department.

    The grease traps are one more big offender in the commercial kitchens and should be a component of your yearly preventative maintenance schedule. Inspection using a sewer camera here will provide you a clear image of the conditions of your pipes.

    When To Put Your Wrench Down And Contact A Professional Plumber

    8/6/2018

    You use your wrench like household superhero, taking extreme satisfaction in your capability to deal with plumbing problems with easiness. However, there comes time when the best DIYers also have to swallow their own pride, put the wrench down, and contact the professional plumber.

    Your Drains Don’t Drain

    Drano did not work. Hence you plunged it and snaked it. You also busted out the special vinegar and baking soda mix. But still, your stubborn sink, shower or bathtub refuses to drain. What is the bottleneck? Grease or soap buildup is a very common reason, or it can be a foreign product lodged somewhere in pipes. An expert Plumber Seattle is best suitable to clear the pipes of all the three. They also will be able to decide if you’ve one among the following bigger issues:

    • Offset pipe. Over time, ground your home was built on shifts and settles. Old clay and concrete pipes move with this, and if these are forced upwards, then gravity will not take down the water as thought.
    • Invasive roots. Plants and trees roots tend to be attracted to oxygen, nutrients, and water flowing through the pipes, and if pipes are not watertight they could make their ways inside.
    • The Faucets Keep On Dripping

      It is the drip which drives you nuts, plus is costing you money as well.

      Consider yourself fortunate if your leakage is caused due to nothing more than corroded or torn washer. It’s a simple fix, however, it will not work out for all the faucets. You might have tried further DIY repairs to your cartridge, compression or ball faucets and if it still has not fixed the leakage, it is time to get in an expert plumber.

      Another reason to ensure that you get that leakage fixed properly by a licensed and skilled plumber: it is very wasteful. While Sacramento drought might be over, still the Seattle encourages you to just cut back on your water use.

      Plumber Seattle

      Your Toilet Don’t Flush

      A popular bathroom plumbing issue which can be a very big issue if you have one toilet only in the house is the bowl which just will not budge. After trying thorough plunge, most of the DIYers will check such common causes:

      • The chain. A broken or disconnected chain cannot lift the flapper that causes toilet to flush. Readjust, reattach or replace that chain.
      • The flapper. A cracked, warped, or bent flush flapper, or valve, can stop it always from sealing water intake hole. Here, replacement is inexpensive and simple.
      • The tube. A cracked or loose overflow tube enables water inside, avoiding the tank from properly filling and flushing.

      In case you have tried all the fast fixes without being successful, what next should you do? “It’s time to contact a professional plumber to fix your issues. There are lots of small problems a plumber can resolve without much financial strain or fuss.

      Your Pipes Keep On Leaking

      You have wrapped that leaking pipe with flex tapes; you have applied repair clamp, fitting compounds and joint fillers; still, the leakage persists. That is when you should know that it is time to call a professional to stop the leak permanently.

      While the solution—probably involving replacing the length of pipes or their fittings—may look like the ideal DIY project, it could be a quite messy one. Other than the mess, you wish to ensure that the work is done properly. Sometimes the toughest work and the largest plumbing issues are best when left to the experts. DIY kitchen catastrophes and Botched bathroom jobs can end up costing you much more in long-run, therefore if you think that you might be getting over your head, call the experts.

Contact Us:

*

Indicates required field

Submit